|
GAS LEAKS
Propane and Butane are heavier than air and a small leak can
rapidly accumulate at floor or bilge level providing the potential
for a large explosion. The Haztec low level sensor is normally set
to detect gas at just 10% of the lower explosive level.
CARBON MONOXIDE
Normally the product of incomplete combustion, CO may originate
from cookers, water heaters, fridges, engine exhausts or heaters
of any type (including duct air). CO is lighter than air, has no
odour or taste and is not visible, but a mere 0.32% concentration
of CO in the air may kill a human within 30 minutes. The Haztec
high level sensor can detect the presence of CO in air well before
levels are reached.
The new, CE approved, Haztec embodies all the proven qualities
of the popular 2S models but now offers many additional advanced
features.
|
| Optional
Remote Sounder |
- One or two sensors may be fitted for detection of Propane/Butane
and/or Carbon Monoxide.
- 12v or 24v systems
- Integral visual and audible alarms
- Marine versions offer the option of a remote weatherproof
sounder that may also be used as a call or alarm signal
- Simple installation with stainless steel mounting hardware
supplied
|
| New
"no power" IP65 Gas Valve |
- option of IP65 protected Latching Gas Valve which uses
no power apart from the initial and final pulse.
- Gas valve (permanently powered or latching) designed to
automatically close if there is loss of power.
- Compact size - Control box measures
110 x 80 x 25mm
- Installation may be designed to include automatic operation
of bilge blowers
- Standard sensor lead length 5m (may be up to 14m)
|
|
Haztec
sounds an alarm and automatically shuts down the gas supply if
a gas leak or carbon monoxide build-up is detected.